I'm running FTP Voyager 16.1.0.0 on Windows 7 on a Dell laptop.  It opens and functions properly, but after a minute or so, it abruptly closes with a Window error message "FTP Voyager has stopped working". Needless to say, the necessity to keep opening the program because it consistently closes itself is frustrating.  Any thoughts?

I recently downloaded FTP Voyager to help with syncing files and folders on our Egnyte FTP site.  After trying to get AllSync to work with much fail I decided to look else where.  Enters FTP Voyager.  So I have installed and set-up the software.  Connects to Egnyte FTP no problem.  I get all the files and folders mapped from our server to the FTP folder and click sync.  PERFECT.  Voyager takes some time but end result is what has changed and what has been added and or deleted.  When I go to sync up the folders the connection times out.  I get an error in the log which states unable to change folders.  When I try to only sync folders or sometimes multiple files the program hangs.  I know the program is free but it is what I am looking for.  Any help would be great at solving this problem.

Thanks.

Paul

I am utilizing the FTP Voyager client to down a 10MB file over an SFTP connection.  It will download about half of the file and then fail giving an SSH_FXP_STATUS: status: SSH_FX_FAILURE; description: Invalid message length in SFTP protocol [808531500]  error message.  If I wait for the client to give the Disconnect message and then retry the download using the Resume option it will complete the transfer.  I have tried this with the 16.2.0.328 and the 16.0.2.0 clients.  Since this is a scheduled task, the resume option is not very practical.  Are there any options that I can configure to keep this connection working to complete the full download in one attempt

I have a connection set up to a server, all that is fine...

I can send smaller files just fine...

Larger files? It seems that the Command channel times out...

In the header of the Welcome message is a warning of a timeout at 3 minutes of inactivity...

So I dutifully setup a 150 second Keep Alive...

What I see in the log is...

The file (11GB+) sends fine...(Although there seems to be many reconnections during the transfer)

I will see an OPTS MLST command send

followed by a PWD and then a reconnection attempt...

Finally I will see a "Transfered <many> bytes STATUS message... Followed by an XCRC - which seems to receive no response after maybe 30 seconds...

Then another PWD...

Then an ERROR> Server has unexpectedly closed the connection...

And we start again....

Ideas?

In trying to set up synchronization between local and remote folders, I get the following error in the log:

13] Tue 01Jul14 10:53:59 - (Action: Synchronize domain.com to C:\backup) - Action failed (Last Error Message: Unable to synchronize folders: Could not retrieve additional information about the local path. Please make sure the path exists and the local user has permissions within the folder.).

I don't understand why as administrator is granted read/write perms across the board. Please advise, thank you.

Hi

I've referred to here by FTP Voyager support.

This is my first time I use FTP Voyager for scheduling file transfer, configuring task was very easy, but I still cannot make it work.

In the task action, I created a new action to download a specific folder (and all files and subfolders inside that folder to my local PC

In action information, I put the (Remote File or Folder) as: /FolderName

Nothing downloaded, and error in the log says:

Execution failed (Last Error Message: Unable to perform file action: Could not retrieve additional information about the source path.  Does the source path exist?).

I changed it to: FolderName (without slash).

Nothing downloaded, and same error in the log.

I then tried: FolderName/*.*

Log says: Execution successfully completed.

But in the local folder, I found it only downloaded files from main folder (No subfolders or files inside them), and some of them with ZERO size !!!!!

Again, I tried: /FolderName/*.*

Log says: Execution successfully completed.

I found that the ZERO size problem has been solved (files downloaded with correct size) but still cannot get the subfolders !

In the forum, I found a link to the older version (ver. 15.2.0.19)

I downloaded and tried it on another PC, It works like a charm, with no errors !

Can anyone here help me to figure out how to make the scheduler download the whole content of remote folder ??

I've had FTP Voyager and FTP Scheduler installed for many years.

On 11/2/2012 the scheduler stopped running nightly backups and now only generates errors when manually executing the jobs.

"Could not retrieve additional information about the local path. Please make sure the path exists and the local user has permissions".

This system has been setup for years and has not changed. The FTP Voyager can manually connect to the profile and I can download files from the server manually without problems.

The only major change to the system were recent FTP software upgrades and patches.

I've double checked the FTP Scheduler Profiles (which never changed passwords in the first place).

I've added a brand new FTP folder with new login password to the server which connects in FTP Voyager, but generates the same errors when manually executing a synch job in FTPV Scheduler.

And I've tried restarting the FTP Voyager Scheduler service and rebooting.

Also nothing has changed on the server and all the files and folders have full read/write access (and can be copied down manually from the FTP Voyager).

Its only when executing the job from within FTP Scheduler that it now fails with these messages and it started around 11/2/12.  But I can't recall on what dates I applied the FTP software patches and upgrades.

Continually getting the following message after a connection is created from FTP Voyager:

SSL accept failed on FTP data channel - The connection will be aborted

Using FTP over TLS - explicit

Works from FileZilla for example to the same host with the same credentials.

Users transfer date to serv-U server with FTP Voyager.

User do also transfer data to some linux SFTP servers.

We used to have FTP Voyager 15.2.0.15 - everything worked fine.

Since updating to FTP Voyager 16.0.2.0 authentication
with linux SFTP servers fail (connection to Serv-U is still working) It seames that the password is not transferred to the server.

Whithout configuring user and password in server profile: I've been asked for a username - not for the password.

     Log: SSH_MSG_USERAUTH_FAILURE

     /var/log/messages:

Jul  5 07:59:21 chwiitsv042 sshd[29597]: Connection from 10.142.40.230 port 2087

Jul  5 07:59:21 chwiitsv042 sshd[29597]: debug1: Client protocol version 2.0; client software version FTP Voyager_16.0.2.0

Jul  5 07:59:21 chwiitsv042 sshd[29597]: debug1: no match: FTP Voyager_16.0.2.0

Jul  5 07:59:21 chwiitsv042 sshd[29597]: debug1: Enabling compatibility mode for protocol 2.0

Jul  5 07:59:21 chwiitsv042 sshd[29597]: debug1: Local version string SSH-2.0-OpenSSH_5.1

Jul  5 07:59:21 chwiitsv042 sshd[29597]: debug1: user zfs-sftp matched group list sftponly at line 143

Jul  5 07:59:21 chwiitsv042 sshd[29597]: debug1: PAM: initializing for "zfs-sftp"

Jul  5 07:59:21 chwiitsv042 sshd[29597]: debug1: PAM: setting PAM_RHOST to "10.142.40.230"

Jul  5 07:59:21 chwiitsv042 sshd[29597]: debug1: PAM: setting PAM_TTY to "ssh"

Jul  5 07:59:21 chwiitsv042 sshd[29597]: debug1: do_cleanup

Jul  5 07:59:21 chwiitsv042 sshd[29597]: debug1: PAM: cleanup

Anyone an idea what's wrong ?

Thank you very much

Christof

Hi All. I upgraded by FTP Voyager/Scheduler from v13 to v16. The interface I like along with the stability but I am having issues galore. So I'll post some and see what I get back. The questions below assume it worked fine in v13 and isn't or is doing something different in v16.

1) My downloads from Unix to Windows used ASCII and was fine. Now the CR (carriage returns) are being stripped and I can't figure out why or how to fix it. In global and profile options I have tried all 3 transfer modes. The file is still stripped.

2) My scheduler actions I have just the file to download and the local path I could use the variables for dates and also rename it from there. Now, if I use a variable or rename in that local path line, it creates a folder with the dates variables and put the file in side unchanged. <- driving me crazy.

3) Many jobs were failing saying "path not found" which I learned has to be the absolute path now. Is this true?

Any help with these would be great. I have had to write a bunch of batch files for temporary use until I can figure out how to make Voyager do it [again] like it has been.

Thanks all

Hi I am not able to connect to SFTP  server from windows 20089 server with proxy server

getting error message The serverhasunexpectedlyclosed the connection

from the same server i am able to connect to SFTP via wiscp 

i believe the issue is with encryption because Winscp had Diffi Helman Exchange group that is not available in FTP voyager

Please help

Regards

Kamran Shams

I'm setting up the FTP Voyager Scheduler to download backup files from our F5's. It works on some, with this log message:

[12] Tue 13Oct15 12:05:04 - (Task: f5-internal-01_backup) - Execution successfully completed.

[07] Tue 13Oct15 12:05:07 - SSH_MSG_DISCONNECT: reason code 11; description: Disconnection initiated by user.

But fails on 4 out of 6 with this log message:

The last message is from having to cancel the task, as it just sits at "Executing". The only difference is the F5 OS version, the ones that work are 11.2.0 and the ones that fail are 11.6.0, anyone see this before?

Hi All,

Does anyone experience getting an error: "SSH Protocol Error: invalid key exchange value." with Serv-U 15.1.2? I was'nt able to connect thru SFTP after the upgrade but not with other protocol.

I already apply the hotfix: http://downloads.solarwinds.com/solarwinds/Release/HotFix/SU-v15.1.2-HotFix1_v2.zip

I have created a listener on the internal interface and tried to connect to it.  I get an error that the server unexpectedly closed the network connection.  The firewall does not appear to be the issue.

Here are the sample logs from Serv-U:

[03] Wed 28Oct15 04:40:28 - (000344) IP-Name: 38.ip-158-69-198.net (158.69.198.38)

[31] Wed 28Oct15 04:40:28 - (000344) SSH Protocol Error: invalid key exchange value.

[02] Wed 28Oct15 04:40:28 - (000344) Closed session

[02] Wed 28Oct15 04:45:45 - (000345) Connected to 60.182.213.43 (local address 24.149.10.248, port 22)

[03] Wed 28Oct15 04:45:45 - (000345) IP-Name: 43.213.182.60.broad.jh.zj.dynamic.163data.com.cn (60.182.213.43)

[31] Wed 28Oct15 04:45:46 - (000345) SSH Protocol Error: invalid key exchange value.

[02] Wed 28Oct15 04:45:46 - (000345) Closed session

I realize that the company has little incentive to worry about how their free FTP client inter-operates with a rival server product, but I wondered if anyone had any clues about my problems connecting to IIS FTP server.  (Long ago I purchased Serv-U for my now geriatric server, and once owned an actual purchased copy of FTP voyager back when it was a paid product.  But by the time moved to a new server, Serv-U went upscale and is way too expensive for my humble purposes.)

I get two types of error, which might or might not be related:

1) When uploading multiple files at once to the server, the connection always hangs on the second file after successfully uploading one file.  IIS log looks like this:

2016-03-02 19:20:56 11.22.33.44 servername\username 44.33.22.11 990 PASV - 227 0 0 1566c127-f9c4-423d-a1b3-baaa0225faea - -

2016-03-02 19:20:56 11.22.33.44 servername\username 44.33.22.11 59159 DataChannelOpened - - 0 0 1566c127-f9c4-423d-a1b3-baaa0225faea - -

2016-03-02 19:20:56 11.22.33.44 servername\username 44.33.22.11 59159 DataChannelClosed - - 2 0 1566c127-f9c4-423d-a1b3-baaa0225faea - -

2016-03-02 19:20:56 11.22.33.44 servername\username 44.33.22.11 990 LIST /transfer/cart-proc.png 550 2 0 1566c127-f9c4-423d-a1b3-baaa0225faea /transfer/cart-proc.png -

2016-03-02 19:20:56 11.22.33.44 servername\username 44.33.22.11 990 TYPE I 200 0 0 1566c127-f9c4-423d-a1b3-baaa0225faea - -

2016-03-02 19:20:56 11.22.33.44 servername\username 44.33.22.11 990 PASV - 227 0 0 1566c127-f9c4-423d-a1b3-baaa0225faea - -

2016-03-02 19:20:56 11.22.33.44 servername\username 44.33.22.11 59160 DataChannelOpened - - 0 0 1566c127-f9c4-423d-a1b3-baaa0225faea - -

2016-03-02 19:20:56 11.22.33.44 servername\username 44.33.22.11 59160 DataChannelClosed - - 0 0 1566c127-f9c4-423d-a1b3-baaa0225faea - -

2016-03-02 19:20:56 11.22.33.44 servername\username 44.33.22.11 990 STOR cart-proc.png 226 0 0 1566c127-f9c4-423d-a1b3-baaa0225faea /transfer/cart-proc.png -

2016-03-02 19:20:56 11.22.33.44 servername\username 44.33.22.11 990 XCRC "/transfer/cart-proc.png" 500 87 0 1566c127-f9c4-423d-a1b3-baaa0225faea - -

2016-03-02 19:20:56 11.22.33.44 servername\username 44.33.22.11 990 MDTM 20151217045612+/transfer/cart-proc.png 213 0 0 1566c127-f9c4-423d-a1b3-baaa0225faea /transfer/cart-proc.png -

2016-03-02 19:20:56 11.22.33.44 servername\username 44.33.22.11 990 PASV - 227 0 0 1566c127-f9c4-423d-a1b3-baaa0225faea - -

2016-03-02 19:20:57 - servername\username 44.33.22.11 59161 DataChannelClosed - - 2 0 1566c127-f9c4-423d-a1b3-baaa0225faea - -

2016-03-02 19:20:57 11.22.33.44 servername\username 44.33.22.11 990 LIST /transfer/core-strat.png 550 2 0 1566c127-f9c4-423d-a1b3-baaa0225faea /transfer/core-strat.png -

2016-03-02 19:20:57 11.22.33.44 servername\username 44.33.22.11 990 PASV - 227 0 0 1566c127-f9c4-423d-a1b3-baaa0225faea - -

2016-03-02 19:20:57 - servername\username 44.33.22.11 59162 DataChannelClosed - - 0 0 1566c127-f9c4-423d-a1b3-baaa0225faea - -

2016-03-02 19:20:57 11.22.33.44 servername\username 44.33.22.11 990 ControlChannelClosed - - 0 0 1566c127-f9c4-423d-a1b3-baaa0225faea - -

This is just uploading a bunch of random images to a folder called "transfer".  After the LIST command for the second filename (to see if it's already there), and another PASV command, everything poops out.

2) I get a lot of "SSL Accept Failed on FTP Data Channel" errors.  These pop up any time I try to upload a file when a file of the same name already exists in the destination folder; and also at random other times.  To get anything done, I need to delete or rename any file of the same name from the server first before uploading; and when the "SSL Accept ..." error pops up at other random times, I need to refresh the destination folder and try again, sometimes repeating this cycle several times.  Eventually it always works, but it's a pain.  The IIS log file for an attempt to upload a file which already exists, generating the "SSL Accept ..." error, looks like this:

2016-03-02 20:56:26 11.22.33.44 - 44.33.22.11 990 ControlChannelOpened - - 0 0 cca4903e-ca7c-4a25-87ba-dd2af0e98a04 - -

2016-03-02 20:56:26 11.22.33.44 - 44.33.22.11 990 USER username 331 0 0 cca4903e-ca7c-4a25-87ba-dd2af0e98a04 - -

2016-03-02 20:56:26 11.22.33.44 servername\username 44.33.22.11 990 PASS *** 230 0 0 cca4903e-ca7c-4a25-87ba-dd2af0e98a04 / -

2016-03-02 20:56:26 11.22.33.44 servername\username 44.33.22.11 990 SYST - 215 0 0 cca4903e-ca7c-4a25-87ba-dd2af0e98a04 - -

2016-03-02 20:56:26 11.22.33.44 servername\username 44.33.22.11 990 FEAT - 211 0 0 cca4903e-ca7c-4a25-87ba-dd2af0e98a04 - -

2016-03-02 20:56:26 11.22.33.44 servername\username 44.33.22.11 990 OPTS UTF8+ON 200 0 0 cca4903e-ca7c-4a25-87ba-dd2af0e98a04 - -

2016-03-02 20:56:26 11.22.33.44 servername\username 44.33.22.11 990 PBSZ 0 200 0 0 cca4903e-ca7c-4a25-87ba-dd2af0e98a04 - -

2016-03-02 20:56:26 11.22.33.44 servername\username 44.33.22.11 990 PROT P 200 0 0 cca4903e-ca7c-4a25-87ba-dd2af0e98a04 - -

2016-03-02 20:56:26 11.22.33.44 servername\username 44.33.22.11 990 PWD - 257 0 0 cca4903e-ca7c-4a25-87ba-dd2af0e98a04 - -

2016-03-02 20:56:26 11.22.33.44 servername\username 44.33.22.11 990 CWD /transfer 250 0 0 cca4903e-ca7c-4a25-87ba-dd2af0e98a04 /transfer -

2016-03-02 20:56:26 11.22.33.44 servername\username 44.33.22.11 990 PASV - 227 0 0 cca4903e-ca7c-4a25-87ba-dd2af0e98a04 - -

2016-03-02 20:56:27 11.22.33.44 servername\username 44.33.22.11 64021 DataChannelOpened - - 0 0 cca4903e-ca7c-4a25-87ba-dd2af0e98a04 - -

2016-03-02 20:56:27 11.22.33.44 servername\username 44.33.22.11 64021 DataChannelClosed - - 0 0 cca4903e-ca7c-4a25-87ba-dd2af0e98a04 - -

2016-03-02 20:56:27 11.22.33.44 servername\username 44.33.22.11 990 LIST /transfer/pxspoe.png 226 0 0 cca4903e-ca7c-4a25-87ba-dd2af0e98a04 /transfer/pxspoe.png -

2016-03-02 20:56:27 11.22.33.44 servername\username 44.33.22.11 990 PASV - 227 0 0 cca4903e-ca7c-4a25-87ba-dd2af0e98a04 - -

2016-03-02 20:56:27 11.22.33.44 servername\username 44.33.22.11 64022 DataChannelOpened - - 0 0 cca4903e-ca7c-4a25-87ba-dd2af0e98a04 - -

2016-03-02 20:56:27 11.22.33.44 servername\username 44.33.22.11 64022 DataChannelClosed - - 2 0 cca4903e-ca7c-4a25-87ba-dd2af0e98a04 - -

2016-03-02 20:56:27 11.22.33.44 servername\username 44.33.22.11 990 LIST /transfer/pxspoe+(2).png 550 2 0 cca4903e-ca7c-4a25-87ba-dd2af0e98a04 /transfer/pxspoe+(2).png -

2016-03-02 20:56:27 11.22.33.44 servername\username 44.33.22.11 990 TYPE I 200 0 0 cca4903e-ca7c-4a25-87ba-dd2af0e98a04 - -

2016-03-02 20:56:30 11.22.33.44 servername\username 44.33.22.11 990 ControlChannelClosed - - 0 0 cca4903e-ca7c-4a25-87ba-dd2af0e98a04 - -

It's not very informative.  It gets as far as verifying that the alternative filename is available, and then poops out.  IIS FTP server seems to have no more logging detail available.  It's not just a dumb-nuts firewall problem, since I can upload individual files one at a time in passive mode using the tricks mentioned above.

Any insight is appreciated.

Hello,

I'm having trouble with this configuration. . .

Windows Server 2008R2 + Voyager 16.0.2.0 + FTP over TLS (implicit) + PASV + connection to Serv-U v6.4

I get this error is in the log:

COMMAND> PASV

227 Entering Passive Mode (70,89,1xx,1xx,7,209)     <== Note, this is the Serv-U IP address.

"ERROR> The home directory specified for this account on the remote server is not accessible. Please contact your system administrator for further assistance."

Things I've tested. . .

This works great (home directory displays, but not for Serv-U):

Windows Server 2008R2 + Voyager 16.0.2.0 + SFTP + PASV + connection to non-Serv-U servers

. . .and this works (home directory displays on Serv-U but using an older version of Voyager + Win7 instead of 2008R2):

Windows7 + Voyager 16.0.1.1 + FTP over TLS (implicit) + PASV + connection to Serv-U v6.4

I'm not using the Scheduler "as service" to do this testing - just the Voyager UI. I'm thinking I should try loading 16.0.1.1 on the 2008R2 server but hesitate because I'm afraid it could screw up the Scheduler that is running other jobs.

Any one have similar experience?

Thanks.

Doug

I'm running FTP Voyager 16.1.0.0 on Windows 7 on a Dell laptop.  It opens and functions properly, but after a minute or so, it abruptly closes with a Window error message "FTP Voyager has stopped working". Needless to say, the necessity to keep opening the program because it consistently closes itself is frustrating.  Any thoughts?

We are trying to transition from FTP Voyager 15.2 and the interface is very different.  I have one task setup in FTP Voyager Scheduler (disabled)

No matter what I do the connection for the task in Scheduler connects every time I open FTP Voyager.  How do I stop it? 

TIA for your help!

I have setup FTP Voyager with the SMTP settings for gmail to send an email after FTP Scheduler completes a task. I have added the event, send email after task complete, however I do not receive an email.

Any help would be appreciated

Regards

Nick

When I run the latest version of FTP Voyager on my win8 (64bit) machine it stops after 1 to 3 minutes.  I get

the message  "FTP Voyager has stopped working".  Any idea how to fix this error ?

Regards,

Bob.

Hi,

Recently got a new computer, and I don't ftp very often, here's the errors I'm receiving, sorry for the length:

FTP Voyager - Version 15.2.0.0

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 3 of 50 allowed.

          220-Local time is now 16:18. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> HOST ftp.j-a-associates.com

          530 You aren't logged in

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

COMMAND:> FEAT

          211-Extensions supported:

           EPRT

           IDLE

           MDTM

           SIZE

           REST STREAM

           MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*;

           MLSD

           AUTH TLS

           PBSZ

           PROT

           ESTA

           PASV

           EPSV

           SPSV

           ESTP

          211 End.

STATUS:>  Server supports resume

COMMAND:> PWD

          257 "/" is your current location

COMMAND:> CWD /

          250 OK. Current directory is /

COMMAND:> OPTS MLST Type;Size;Modify;UNIX.mode;UNIX.owner;UNIX.group;

          200  MLST OPTS type;size;sizd;modify;UNIX.mode;UNIX.uid;UNIX.gid;unique;

COMMAND:> PORT 192,168,1,103,220,112

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 2)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 3 of 50 allowed.

          220-Local time is now 16:19. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,115

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 3)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 4 of 50 allowed.

          220-Local time is now 16:20. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,118

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 4)...

COMMAND:> NOOP

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 3 of 50 allowed.

          220-Local time is now 16:22. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,149

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 5)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 3 of 50 allowed.

          220-Local time is now 16:23. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,153

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 6)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 4 of 50 allowed.

          220-Local time is now 16:25. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,158

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 7)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 4 of 50 allowed.

          220-Local time is now 16:26. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

COMMAND:> NOOP

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,160

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 8)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 3 of 50 allowed.

          220-Local time is now 16:28. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,165

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 9)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 3 of 50 allowed.

          220-Local time is now 16:29. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,169

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 10)...

COMMAND:> NOOP

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 2 of 50 allowed.

          220-Local time is now 16:31. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,213

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 11)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 2 of 50 allowed.

          220-Local time is now 16:32. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

COMMAND:> NOOP

          200 Zzz...