Quantcast
Channel: THWACK: Popular Discussions - FTP Voyager
Viewing all 15134 articles
Browse latest View live
↧

Site profiles not visible in Scheduler

November 22, 2014, 2:54 am
$
0
0

If I create a new site profile in Voyager I can not see it in Scheduler when I go to set up a new task. How do I get Scheduler to see the profiles created in Voyager? I seem to recall at one time (maybe an earlier version) that there was a way to "send" the profiles to Scheduler....

 

In scheduler I can see 2 folders - Sites, Personal Sites. But both are empty - even though there are lots of sites defined under these folders in Voyager.

 

Moreover, when I change site profile details e.g. IP address in Voyager, this is not being picked up by Scheduler which continues to try to connect to the old address.

 

There seems to be a total breakdown in connection between Voyager and Scheduler.

 

HELP!

↧
Search

FTP Voyager Remote Folder actions

August 4, 2015, 7:35 am
$
0
0

I need to schedule to download a file everyday that changes based on date profile below. How would I set the variables for this.

 

File needed to download everyday:    FOF_08_04_15.mp3   this is the one for today Aug 4 2015

                                                            FOF_Month_Day_Last 2 digits of Year.mp3

 

Any help would be greatly appreciated.

Thanks,

Mark

↧
↧

Scheduler runs task continuously

March 12, 2013, 10:21 am
$
0
0

I have several tasks setup to run at different time intervals on a daily basis.

After the time change for Daylight Savings Time on Sunday morning the tasks run as scheduled and then stop and re-start continuously.

 

I have tried re-starting the service, updating the task scheduler time and re-booting the server all to no avail.

 

Has anyone else seen this or does anyone have any ideas on how to correct it.

 

I am on FTP Voyager version 16.0.2.0.

 

Never had this issue on any previous versions.

 

Is there a place to download version 15 again????

↧

FTP Voyager commnad line options

July 28, 2014, 5:48 am
$
0
0

 

Hello


I’m trying to run FTP Voyager from the command line like so:call "C:\Program Files\RhinoSoft\FTP Voyager\FTP Voyager.exe" profile=ZFTP autosync=1 syncoptions=0 local=C:\zsm2web\ remote=/ZSMDOC/ autoquit=1

 

This works if the remote folder is empty.

 

I want  to overwrite the existing files based on the timestamp of the files in the local folder or delete the files if they dont exist in de local folder.


Can anyone give me a working example using :

syncoptions List

 

  •         SyncRemote = 0x0000

 

  •         SyncLocal = 0x0001

 

    • IgnoreCase = 0x0002

 

    • CompareSize = 0x0004

 

    • CompareTime = 0x0008

 

    • IncludeDirs = 0x0010

 

    • DontDelete = 0x0020

 

    • OverwriteConfirmations = 0x0040

 

    • DeleteConfirmations = 0x0080

 

    • RemoteIgnoreNewer = 0x0100

 

    • RemoteIgnoreOlder = 0x0200

 

    • LocalIgnoreNewer = 0x0400

 

    • LocalIgnoreOlder = 0x0800

 

    • MinimizeStatusDialogs = 0x1000

 

    • QueueErrorMessages = 0x2000

 

    • IgnoreSymbolicLinks = 0x4000

 

  Not sure how i should add this to the command line so a complete working example woulde be appreciated

 

 

 

 

 

 

 

 

 

 

↧

FTP Voyager - Scheduler problem

March 19, 2014, 7:01 am
$
0
0

We have FTP Voyager 16.1.0.0 installed on a Windows 2008 R2 server. We have two automatic uploads scheduled to occur weekly (FTP Voyager establishes a connection to the destination and then moves and .CSV files from a particular directory to the destination). Once the file has been successfully moved, an email alert is generated and delivered internally.

 

This configuration has been working fine, until Daylight savings time began on march 9th.

Now, when the scheduled job runs, it executes continuously for an entire hour; because we receive an email alert when it runs, we know it executes about 2,600 times.

e.g. a scheduled task that should execute one time at 0420 on tuesday is now executing once every few seconds for an hour.


There is a line item on the release notes for 16.1.0.0 (The version we have) which states

 

FTP client release notes for FTP Voyager.

  • Corrected a Scheduler bug where tasks created when daylight savings time is off and scheduled to run daily or at a custom interval would repeatedly run for an hour after their scheduled execution time when daylight savings time resumed.

 

which is exactly what we're experiencing - is this a known issue / was the bug not actually corrected?

 

Thanks!

↧
↧

Is there just NO support for FTP Voyager?

March 13, 2018, 6:03 am
$
0
0

I'm seeing lots of questions posted here, but never any company-provided answers.  I get that it's a free tool, but the level of support is an indication of how supported I would be if I upgraded to the paid product.

↧

FTP Voyager and Windows Server 2012

March 12, 2015, 5:20 am
$
0
0

I have a problem with FTP Voyager 16.2.0.328, i have some mapped network drives in WIndows Server 2012, i started the time sheduler, but i canot select in the time sheduler a network drive, in the normale Voyage i can select the network drive.

 

I hope someone can help me or say the answer for this troubleshooting.

↧

FTP Voyager Scheduler taking a lot of time?

November 3, 2015, 8:48 am
$
0
0

I have my FTP Voyager Scheduler setup to automatically connect to a server and download a backup file (about 17GB).

 

The process starts at 3:00am and ends at about 7:45am.  However, if I do it manually, it will only take about 45 minutes.  Any ideas on how to speed up the scheduled process or settings I have selected that might slow it down?

 

I know it's not bandwidth or network congestion because I can do the manual transfer during the day with everybody on the network.  At 3:00am, nobody is on the network.

 

Thanks!

↧
Search

Scheduler warning "The operation cannot be performed" while setting up an Action

December 2, 2015, 6:43 am
$
0
0

Hi, I keep getting an error "The operation cannot be performed" while trying to save an action. The screenshot shows FTP Voyager in the background with the connection open from the "Scheduler Site Profile Manager" and I have full access to the remote site... any help would be appreciated!

 

(Windows server 2003 sp2, FTP Voyager Ver 16.2.0.328)

 

FTPError.JPG

↧
↧

Remote files not deleted after "Move Down"

December 21, 2017, 8:00 am
$
0
0

Hello All,

 

I've been using FTP voyager for a while now and never had any issues until a recent install. I'm using the scheduler to check a remote server, and "Move Down" all files. When the schedule runs, it succesfully connects to the remote location, and downloads the files, but never deletes the source files. When I check the logs, there are almost always multiple attempts on a least a few of the files, and it doesn't look like the DELE command is ever even attempted. I created an identical profile in the FTP Voyager full client, and when I manually "Move Down" the same files, it behaves as expected, does not encounter any errors, and removes the source files after download.

 

Any help here would be very appreciated!

 

Thank you.

↧

FTP Voyager scheduled job log files not "refreshing"

December 22, 2017, 7:11 am
$
0
0

Pretty sure I have the settings right to get a NEW log file each day, but I'm getting data from days ago in my log file.  Here's my settings - what could be wrong?   Thanks

 

↧

Is there a way to run FTP Voyager using scheduled events from a server while not logged in?

March 15, 2018, 12:04 pm
$
0
0

Is there a way to run FTP Voyager using scheduled events from a server while not logged in?

↧

FTP Voyager commnad line options

July 28, 2014, 5:48 am
$
0
0

 

Hello


I’m trying to run FTP Voyager from the command line like so:call "C:\Program Files\RhinoSoft\FTP Voyager\FTP Voyager.exe" profile=ZFTP autosync=1 syncoptions=0 local=C:\zsm2web\ remote=/ZSMDOC/ autoquit=1

 

This works if the remote folder is empty.

 

I want  to overwrite the existing files based on the timestamp of the files in the local folder or delete the files if they dont exist in de local folder.


Can anyone give me a working example using :

syncoptions List

 

  •         SyncRemote = 0x0000

 

  •         SyncLocal = 0x0001

 

    • IgnoreCase = 0x0002

 

    • CompareSize = 0x0004

 

    • CompareTime = 0x0008

 

    • IncludeDirs = 0x0010

 

    • DontDelete = 0x0020

 

    • OverwriteConfirmations = 0x0040

 

    • DeleteConfirmations = 0x0080

 

    • RemoteIgnoreNewer = 0x0100

 

    • RemoteIgnoreOlder = 0x0200

 

    • LocalIgnoreNewer = 0x0400

 

    • LocalIgnoreOlder = 0x0800

 

    • MinimizeStatusDialogs = 0x1000

 

    • QueueErrorMessages = 0x2000

 

    • IgnoreSymbolicLinks = 0x4000

 

  Not sure how i should add this to the command line so a complete working example woulde be appreciated

 

 

 

 

 

 

 

 

 

 

↧
↧

FTP Voyager 15.2.0.19 - DOWNLOAD?

January 15, 2015, 4:27 am
$
0
0

I have just changed my computer in the office and tried to transfer to the new one my "old" FTP Voyager 15.2.0.19 which I bought from Rhinosoft in early 2012. It was a surprise to read that Rhinosoft does not deal with this anymore...

As I am very old-fashioned, I would like to continue using that version (without upgrading to the 16). Is there any place where I can get a zip or any other file (e.g. by email) to download and install FTP Voyager 15.2.0.19?

Kind regards from sunny  Ibiza

Dirk-MICHAEL

↧

Move file after upload automatically

February 12, 2013, 7:15 am
$
0
0

I have a situation where I will FTP a file to a folder and then need to move it to another folder on the remote server. I have seen the automatic rename function and have tried testing this on my own network but it does not appear that I can rename a file where I can specify a file path in the automatic rename function. I would have to do this automatically through the scheduler.

↧
Search

FTP-Voyager in command line mode.

March 25, 2013, 4:55 am
$
0
0

Hi,

 

Got FTP-Voyager to work great in command mode using a batch file to initiate file sync to my server from industrial robots to back them up.  Was working great as far as doing the job closing out starting another instance and going to the next robot.

 

New problem.....

It no longer closes out at the end of the sync.  What option did I change that keeps FTP-Voyager from closing ?  I am using "autoquit=1" in the command line.

 

Thanks

Stan

↧

Home directory not accessible

December 6, 2013, 1:47 pm
$
0
0

Hello,

 

I'm having trouble with this configuration. . .

Windows Server 2008R2 + Voyager 16.0.2.0 + FTP over TLS (implicit) + PASV + connection to Serv-U v6.4

 

I get this error is in the log:

COMMAND> PASV

227 Entering Passive Mode (70,89,1xx,1xx,7,209)     <== Note, this is the Serv-U IP address.

"ERROR> The home directory specified for this account on the remote server is not accessible. Please contact your system administrator for further assistance."

 

Things I've tested. . .

This works great (home directory displays, but not for Serv-U):

Windows Server 2008R2 + Voyager 16.0.2.0 + SFTP + PASV + connection to non-Serv-U servers

 

. . .and this works (home directory displays on Serv-U but using an older version of Voyager + Win7 instead of 2008R2):

Windows7 + Voyager 16.0.1.1 + FTP over TLS (implicit) + PASV + connection to Serv-U v6.4

 

I'm not using the Scheduler "as service" to do this testing - just the Voyager UI. I'm thinking I should try loading 16.0.1.1 on the 2008R2 server but hesitate because I'm afraid it could screw up the Scheduler that is running other jobs.

 

Any one have similar experience?

 

Thanks.

Doug

↧
↧

FTP Voyager commnad line options

July 28, 2014, 5:48 am
$
0
0

 

Hello


I’m trying to run FTP Voyager from the command line like so:call "C:\Program Files\RhinoSoft\FTP Voyager\FTP Voyager.exe" profile=ZFTP autosync=1 syncoptions=0 local=C:\zsm2web\ remote=/ZSMDOC/ autoquit=1

 

This works if the remote folder is empty.

 

I want  to overwrite the existing files based on the timestamp of the files in the local folder or delete the files if they dont exist in de local folder.


Can anyone give me a working example using :

syncoptions List

 

  •         SyncRemote = 0x0000

 

  •         SyncLocal = 0x0001

 

    • IgnoreCase = 0x0002

 

    • CompareSize = 0x0004

 

    • CompareTime = 0x0008

 

    • IncludeDirs = 0x0010

 

    • DontDelete = 0x0020

 

    • OverwriteConfirmations = 0x0040

 

    • DeleteConfirmations = 0x0080

 

    • RemoteIgnoreNewer = 0x0100

 

    • RemoteIgnoreOlder = 0x0200

 

    • LocalIgnoreNewer = 0x0400

 

    • LocalIgnoreOlder = 0x0800

 

    • MinimizeStatusDialogs = 0x1000

 

    • QueueErrorMessages = 0x2000

 

    • IgnoreSymbolicLinks = 0x4000

 

  Not sure how i should add this to the command line so a complete working example woulde be appreciated

 

 

 

 

 

 

 

 

 

 

↧

XCRC command failed

November 26, 2014, 11:29 pm
$
0
0

Hi,

 

We are using FTP Voyager 16.1.0.0 & sometimes schedule task stuck. There are 5 actions (Local Folders Synchronize) used. Task log are showing below messages.

Kindly suggest what could be the problem & how to resolve it.

 

[03] Thu 27Nov14 11:08:09 - Transferred 80,058 bytes. 625.45 KB/sec.

[05] Thu 27Nov14 11:08:09 - XCRC "/DATA/Data_11272014_1_00_02_AM.CSV"

[06] Thu 27Nov14 11:08:09 - 500 'XCRC "/Data/Data_11272014_1_00_02_AM.CSV"': command not understood.

[04] Thu 27Nov14 11:08:09 - XCRC command failed. The command may not be supported by this server.

[03] Thu 27Nov14 11:08:09 - XCRC command checking has been disabled for future transfers using this session.

 

Regards,

 

Dhiraj

↧

FTP Voyager and Windows Server 2012

March 12, 2015, 5:20 am
$
0
0

I have a problem with FTP Voyager 16.2.0.328, i have some mapped network drives in WIndows Server 2012, i started the time sheduler, but i canot select in the time sheduler a network drive, in the normale Voyage i can select the network drive.

 

I hope someone can help me or say the answer for this troubleshooting.

↧
Viewing all 15134 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>