Hi,

Recently got a new computer, and I don't ftp very often, here's the errors I'm receiving, sorry for the length:

FTP Voyager - Version 15.2.0.0

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 3 of 50 allowed.

          220-Local time is now 16:18. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> HOST ftp.j-a-associates.com

          530 You aren't logged in

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

COMMAND:> FEAT

          211-Extensions supported:

           EPRT

           IDLE

           MDTM

           SIZE

           REST STREAM

           MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*;

           MLSD

           AUTH TLS

           PBSZ

           PROT

           ESTA

           PASV

           EPSV

           SPSV

           ESTP

          211 End.

STATUS:>  Server supports resume

COMMAND:> PWD

          257 "/" is your current location

COMMAND:> CWD /

          250 OK. Current directory is /

COMMAND:> OPTS MLST Type;Size;Modify;UNIX.mode;UNIX.owner;UNIX.group;

          200  MLST OPTS type;size;sizd;modify;UNIX.mode;UNIX.uid;UNIX.gid;unique;

COMMAND:> PORT 192,168,1,103,220,112

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 2)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 3 of 50 allowed.

          220-Local time is now 16:19. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,115

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 3)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 4 of 50 allowed.

          220-Local time is now 16:20. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,118

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 4)...

COMMAND:> NOOP

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 3 of 50 allowed.

          220-Local time is now 16:22. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,149

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 5)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 3 of 50 allowed.

          220-Local time is now 16:23. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,153

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 6)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 4 of 50 allowed.

          220-Local time is now 16:25. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,158

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 7)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 4 of 50 allowed.

          220-Local time is now 16:26. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

COMMAND:> NOOP

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,160

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 8)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 3 of 50 allowed.

          220-Local time is now 16:28. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,165

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 9)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 3 of 50 allowed.

          220-Local time is now 16:29. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,169

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 10)...

COMMAND:> NOOP

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 2 of 50 allowed.

          220-Local time is now 16:31. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,213

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 11)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 2 of 50 allowed.

          220-Local time is now 16:32. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

COMMAND:> NOOP

          200 Zzz...

Hi all,

   I'm having trouble keeping the log files free of clutter; specifically all the SSH messages. Here's a partial log of one session:

[03] Wed 29Oct14 00:10:01 - Negotiating SSH2 session with server...

[03] Wed 29Oct14 00:10:01 - Client Identification: SSH-2.0-FTP Voyager_16.1.0.0

[03] Wed 29Oct14 00:10:02 - Server Identification: SSH-2.0-SSHD

[03] Wed 29Oct14 00:10:02 - Initializing key exchange process...

[03] Wed 29Oct14 00:10:02 - Selected key exchange algorithm: diffie-hellman-group1-sha1

[03] Wed 29Oct14 00:10:02 - Host Key Fingerprint: xxxxxxxxxxxxxxxxxxxxxxxxx

[03] Wed 29Oct14 00:10:02 - Server --> Client: Encryption: aes128-cbc, MAC: hmac-sha1, Compression: zlib

[03] Wed 29Oct14 00:10:02 - Client --> Server: Encryption: aes128-cbc, MAC: hmac-sha1, Compression: zlib

[03] Wed 29Oct14 00:10:02 - Selected public key protocol: ssh-rsa

[03] Wed 29Oct14 00:10:02 - Key exchange process successfully completed.

[07] Wed 29Oct14 00:10:02 - SSH_MSG_SERVICE_REQUEST: service: ssh-userauth

[08] Wed 29Oct14 00:10:02 - SSH_MSG_SERVICE_ACCEPT: service accepted

[03] Wed 29Oct14 00:10:02 - Querying server for supported authentication methods

[07] Wed 29Oct14 00:10:02 - SSH_MSG_USERAUTH_REQUEST: user: xxxxxxxxx; service: ssh-connection; type: none

[08] Wed 29Oct14 00:10:02 - SSH_MSG_USERAUTH_FAILURE: partial: 0; available authentications: password, publickey, keyboard-interactive

[03] Wed 29Oct14 00:10:02 - Supported authentication methods: password, publickey, keyboard-interactive

[07] Wed 29Oct14 00:10:02 - SSH_MSG_USERAUTH_REQUEST: user: xxxxxxxxx; service: ssh-connection; type: password

[08] Wed 29Oct14 00:10:03 - SSH_MSG_USERAUTH_SUCCESS: authentication successful

[03] Wed 29Oct14 00:10:03 - Login successful.

[07] Wed 29Oct14 00:10:03 - SSH_MSG_CHANNEL_OPEN: type: session; local channel: 0

[08] Wed 29Oct14 00:10:03 - SSH_MSG_CHANNEL_OPEN_CONFIRMATION: local channel: 0; remote channel: 0

[07] Wed 29Oct14 00:10:03 - SSH_MSG_CHANNEL_REQUEST: remote channel: 0; request type: subsystem; subsytem: sftp

[08] Wed 29Oct14 00:10:04 - SSH_MSG_CHANNEL_SUCCESS: channel request succeeded; local channel: 0

[07] Wed 29Oct14 00:10:04 - SSH_FXP_INIT: client version: 6

[08] Wed 29Oct14 00:10:04 - SSH_FXP_VERSION: server version: 3

[03] Wed 29Oct14 00:10:04 - Negotiated SFTP version 3

[07] Wed 29Oct14 00:10:04 - SSH_FXP_REALPATH: translating path: .

[08] Wed 29Oct14 00:10:05 - SSH_FXP_NAME: translated path: /

I don't want to see this stuff, so I configured my options NOT to log them:

As you can guess, I still see them. Am I missing something?

Al

I use program FTP voyager. I like know how i can create that after uploading large files (about 80 MB) program shutdown computer?

So the Move Down functionality in FTP Voyager Scheduler is not consistent with what one would typically call a file move operation.  Previously, in version 15 of FTP Voyager, a Move Down operation behaved like this:

1. Get list of all files at destination.
2. Copy remote file to local destination.
3. Delete remote file.
4. Go to next file on list.
5. Continue until list is empty.

Now, however, version 16 behaves like this:

1. Get list of all files at destination.
2. Copy remote file to local destination.
3. Go to next file.
4. Continue until list generated at step 1 is complete.
5. Delete all remote files at destination, regardless of what was contained in list generated at step 1.

Effectively it is just the Download and Delete Remote Path commands chained together.  This is a big problem for my automation, as I cannot guarantee that the folder won't have new files created in it during download operations #2-4, which will then ultimately get deleted by step #5.

So long story short, can the behavior be reverted to the v15 style of move?

Hello all,

Voyager has been chugging along for weeks now, with no issues. All of a sudden, the logging behaviour has changed, and I don't understand why. ALL scheduled jobs have logging set like this:

In the past, I would get 1 log file per day that contained all the logs of all the jobs that ran that day: 2014-07-11.txt, 2014-07-12.txt, and so on.

Then all of a sudden, the file 2014-07-14.txt was the last log file created. All the jobs are still being logged, but into the file of the 14th. Why did Voyager suddenly stop creating new log files? There were no updates to the software, the server, the OS, etc. I tried restarting the service, recreating a job, but no luck. Note: I realize the Automatically rotate Log Files is set to Never, but this has been the case from day 1 when it was working. The fact that my logfile name is a variable should force new files to be created. What am I missing?

Al

Hello,

I've been using FTP Voyager for a little over a year now. My event email notifications have always worked. All of the sudden about a month ago the email notifications come form Voyager have been sporadic and then not at all. I don't see anything wrong with my SMTP server seeing as everything else is coming through it (such as my web filter, firewall and other server notifications). It is only notifications from FTP Voyager. Is this a known error?

Thanks.

I finally figured out how to get the FTP Voyager Scheduler to find the remote path but even though I am navigating and selecting my local path, keeps saying it cannot open it. See error below. How can this be? I am using the FTP Voyager local directory tool to open up the folder. I have tried folders on my C drive and D drive but neither works.

04] Thu 25Dec14 09:10:28 - Error opening C:\FROM VITERA\ for writing ((0x3) The system cannot find the path specified.).

Hello,

I'm having trouble with this configuration. . .

Windows Server 2008R2 + Voyager 16.0.2.0 + FTP over TLS (implicit) + PASV + connection to Serv-U v6.4

I get this error is in the log:

COMMAND> PASV

227 Entering Passive Mode (70,89,1xx,1xx,7,209)     <== Note, this is the Serv-U IP address.

"ERROR> The home directory specified for this account on the remote server is not accessible. Please contact your system administrator for further assistance."

Things I've tested. . .

This works great (home directory displays, but not for Serv-U):

Windows Server 2008R2 + Voyager 16.0.2.0 + SFTP + PASV + connection to non-Serv-U servers

. . .and this works (home directory displays on Serv-U but using an older version of Voyager + Win7 instead of 2008R2):

Windows7 + Voyager 16.0.1.1 + FTP over TLS (implicit) + PASV + connection to Serv-U v6.4

I'm not using the Scheduler "as service" to do this testing - just the Voyager UI. I'm thinking I should try loading 16.0.1.1 on the 2008R2 server but hesitate because I'm afraid it could screw up the Scheduler that is running other jobs.

Any one have similar experience?

Thanks.

Doug

Hi

I've referred to here by FTP Voyager support.

This is my first time I use FTP Voyager for scheduling file transfer, configuring task was very easy, but I still cannot make it work.

In the task action, I created a new action to download a specific folder (and all files and subfolders inside that folder to my local PC

In action information, I put the (Remote File or Folder) as: /FolderName

Nothing downloaded, and error in the log says:

Execution failed (Last Error Message: Unable to perform file action: Could not retrieve additional information about the source path.  Does the source path exist?).

I changed it to: FolderName (without slash).

Nothing downloaded, and same error in the log.

I then tried: FolderName/*.*

Log says: Execution successfully completed.

But in the local folder, I found it only downloaded files from main folder (No subfolders or files inside them), and some of them with ZERO size !!!!!

Again, I tried: /FolderName/*.*

Log says: Execution successfully completed.

I found that the ZERO size problem has been solved (files downloaded with correct size) but still cannot get the subfolders !

In the forum, I found a link to the older version (ver. 15.2.0.19)

I downloaded and tried it on another PC, It works like a charm, with no errors !

Can anyone here help me to figure out how to make the scheduler download the whole content of remote folder ??

We are evaluating FTP Voyager for automating file transfers between sites with SSL. There are two worrisome issues:

1. Email reporting is failing. I am receiving an error in the Scheduler log stating the following:
   1. [04] Wed 31Dec14 13:43:30 - EVENT ERROR: Unable to send message to 'Test_email_Address': Unable to connect to SMTP server  on port 25.
   2. Our SMTP server is functioning with other services from this same server.
   3. I have input the SMTP information into both the FTP Voyager Options and the Scheduler Options.
   4. I have also checked the configuration files called out in another thread here and see our SMTP information correctly.
2. I cannot create Scheduler Site Profiles directly.
   1. I have to create them in the FTP Voyager Site Profile First and then right click and select 'Copy to Scheduler'
   2. If I create them in the Scheduler Site Profile directly, none of the advanced features apply correctly and the profile will not connect to the SSL site.

I believe the two issues may be related.  Issue number 2 is an annoyance but not a show stopper. Issue number 1 on the other hand is preventing me from completing my proof of concept and integration into monitoring.

The scheduler service is running as a domain user with full rights to the server it's running on.

Any assistance would be greatly appreciated. I can provide log files, screen shots, etc. if required.

Thanks,

-Mike

Seems I can replicate this behavior every time by simply clicking the title bar while any transfer is in progress. It also happens when trying to view a downloaded file from the local browser. I'm using passive mode. The most common fault is:

Faulting application ftp voyager.exe, version 16.0.2.0, faulting module shlwapi.dll, version 6.0.2900.5912, fault address 0x00008440, but also happens on ntdll.dll, ftpvoyage.exe and "Unknown."

If I don't touch it, it seems to work, but almost any interaction with it after or during transfers crashes it.

Any ideas?

Thanks,

Ron

Hey Guys -

I do a lot of downloading over the internet via FTP - most of which are files 1gb - 8gb.  For a couple of years now, I've used SmartFTP due to it's feature of being able to set "Multi-Part Transfers.  Using this makes downloading much faster per file!  For example, when downloading a large file (1gb+) with default settings, it downloads at ~250kb/s  when above is set to 32, I go my max speed of 2.0mb/s.  If not familer, here's how the setting works:

- It applies to each download worker

- You may set the file size threshold for it to be used (I set mine to 1mb)

- You configure how many "Parts" (connections) you wish for it to use (between 1 - 32)

- It may be enabled or disabled globally or per favorite

I'm trying to find an alternative FTP client as SmartFTP has had issues recently, but cannot find one which offers this setting.  Does FTP Voyager?

I downloaded and installed FTP Voyager and started a download from the same site with default settings and 1 worker.  The download speed capped at about 270kb/s.

If you could tell me how to set this if available, I'd appreciate it very much!

Thank You!

yaI'm currently exploring using Voyager for a large multi-user deployment where files will be uploaded on an hourly or daily basis to a common ftp location via Scheduler.   The requirement is that the files that were recently transferred should be moved into a post-processing folder for safe keeping in case there is a reason to need to re-process them or retrieve the files that were uploaded.

Other than doing a generic batch file and moving '*' from the local source to the local archive destination, I do not see a way to accomplish what I need to do.   The batch solution would work, but I am looking for something more elgant, and preferably with file  by file copies so that error checking and logging can be handled better than a generic "copy * c:\newlocation"

Please let me know if Im missing an obvious feature, or if this is indeed not possible.

Hi,

is it possible to run a schedules\ task remotely with or without CLI?
Is it possible to access FTP Voyager Client on a remote client via Internet browser?

I thank you for any advice.

Kind Regards
FK

I have several tasks setup to run at different time intervals on a daily basis.

After the time change for Daylight Savings Time on Sunday morning the tasks run as scheduled and then stop and re-start continuously.

I have tried re-starting the service, updating the task scheduler time and re-booting the server all to no avail.

Has anyone else seen this or does anyone have any ideas on how to correct it.

I am on FTP Voyager version 16.0.2.0.

Never had this issue on any previous versions.

Is there a place to download version 15 again????

Hello

I’m trying to run FTP Voyager from the command line like so:call "C:\Program Files\RhinoSoft\FTP Voyager\FTP Voyager.exe" profile=ZFTP autosync=1 syncoptions=0 local=C:\zsm2web\ remote=/ZSMDOC/ autoquit=1

This works if the remote folder is empty.

I want  to overwrite the existing files based on the timestamp of the files in the local folder or delete the files if they dont exist in de local folder.

Can anyone give me a working example using :

syncoptions List

•         SyncRemote = 0x0000

•         SyncLocal = 0x0001

• IgnoreCase = 0x0002

• CompareSize = 0x0004

• CompareTime = 0x0008

• IncludeDirs = 0x0010

• DontDelete = 0x0020

• OverwriteConfirmations = 0x0040

• DeleteConfirmations = 0x0080

• RemoteIgnoreNewer = 0x0100

• RemoteIgnoreOlder = 0x0200

• LocalIgnoreNewer = 0x0400

• LocalIgnoreOlder = 0x0800

• MinimizeStatusDialogs = 0x1000

• QueueErrorMessages = 0x2000

• IgnoreSymbolicLinks = 0x4000

  Not sure how i should add this to the command line so a complete working example woulde be appreciated

Continually getting the following message after a connection is created from FTP Voyager:

SSL accept failed on FTP data channel - The connection will be aborted

Using FTP over TLS - explicit

Works from FileZilla for example to the same host with the same credentials.

I use program FTP voyager. I like know how i can create that after uploading large files (about 80 MB) program shutdown computer?

I downloaded and set up the newest version of scheduler and set up a test FTP site on my Server and Test local folder from which to upload a file to the remote server. When I execute nothing happens except it says "Executing." But there is no file in the Remote folder. Yet the Log says:    Sat 22Nov14 16:50:55 - (Task: test upload) - Execution successfully completed.   I can get onto the remote server through the Voyager FTP utility, so I know that works.What's up?

I have two jobs setup in the Scheduler (v16) that send email out to a few people when complete.  I get an error the following error:

EVENT ERROR: Unable to send message to email@email.com: Unable to connect

to SMTP server  on port 25.

I am able to send email from the command line on this server so I know email is working.  I've double checked all my settings and still cannot figure this out.

Anybody else see this error?

Thanks.

Server 2003

Voyager 16