I have several tasks setup to run at different time intervals on a daily basis.

After the time change for Daylight Savings Time on Sunday morning the tasks run as scheduled and then stop and re-start continuously.

I have tried re-starting the service, updating the task scheduler time and re-booting the server all to no avail.

Has anyone else seen this or does anyone have any ideas on how to correct it.

I am on FTP Voyager version 16.0.2.0.

Never had this issue on any previous versions.

Is there a place to download version 15 again????

Hi,

Recently got a new computer, and I don't ftp very often, here's the errors I'm receiving, sorry for the length:

FTP Voyager - Version 15.2.0.0

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 3 of 50 allowed.

          220-Local time is now 16:18. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> HOST ftp.j-a-associates.com

          530 You aren't logged in

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

COMMAND:> FEAT

          211-Extensions supported:

           EPRT

           IDLE

           MDTM

           SIZE

           REST STREAM

           MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*;

           MLSD

           AUTH TLS

           PBSZ

           PROT

           ESTA

           PASV

           EPSV

           SPSV

           ESTP

          211 End.

STATUS:>  Server supports resume

COMMAND:> PWD

          257 "/" is your current location

COMMAND:> CWD /

          250 OK. Current directory is /

COMMAND:> OPTS MLST Type;Size;Modify;UNIX.mode;UNIX.owner;UNIX.group;

          200  MLST OPTS type;size;sizd;modify;UNIX.mode;UNIX.uid;UNIX.gid;unique;

COMMAND:> PORT 192,168,1,103,220,112

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 2)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 3 of 50 allowed.

          220-Local time is now 16:19. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,115

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 3)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 4 of 50 allowed.

          220-Local time is now 16:20. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,118

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 4)...

COMMAND:> NOOP

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 3 of 50 allowed.

          220-Local time is now 16:22. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,149

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 5)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 3 of 50 allowed.

          220-Local time is now 16:23. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,153

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 6)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 4 of 50 allowed.

          220-Local time is now 16:25. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,158

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 7)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 4 of 50 allowed.

          220-Local time is now 16:26. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

COMMAND:> NOOP

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,160

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 8)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 3 of 50 allowed.

          220-Local time is now 16:28. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,165

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 9)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 3 of 50 allowed.

          220-Local time is now 16:29. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,169

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 10)...

COMMAND:> NOOP

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 2 of 50 allowed.

          220-Local time is now 16:31. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

STATUS:>  Successful reconnect.  Attempting to resend failed command.

COMMAND:> PORT 192,168,1,103,220,213

          200 PORT command successful

COMMAND:> MLSD

ERROR:>   Socket error: WSAETIMEDOUT - Connection timed out.  Try using PASV mode (View | Options | Connection) if you receive this error during a LIST, MLSD, or NLST commands. (10060)

ERROR:>   Socket error: Unknown socket error (1814)

STATUS:>  Error sending command "MLSD".  Reconnecting (send attempt 11)...

STATUS:>  Connecting to "ftp.j-a-associates.com" on port 21.

          220---------- Welcome to Pure-FTPd [privsep] [TLS] ----------

          220-You are user number 2 of 50 allowed.

          220-Local time is now 16:32. Server port: 21.

          220-This is a private system - No anonymous login

          220-IPv6 connections are also welcome on this server.

          220 You will be disconnected after 15 minutes of inactivity.

STATUS:>  Connected.  Logging into the server

COMMAND:> USER jaass2

          331 User jaass2 OK. Password required

COMMAND:> PASS *********

          230 OK. Current restricted directory is /

STATUS:>  Login successful

COMMAND:> SYST

          215 UNIX Type: L8

STATUS:>  Server supports resume

COMMAND:> CWD /

          250 OK. Current directory is /

COMMAND:> NOOP

          200 Zzz...

Evidently this is a widespread problem according to the posts and Google searches.

I'm using version 16.1.0.0 and most scheduled 'Move Up' tasks just hang.

The log files show the Quit command multiple times but the process just keeps running, doing nothing except preventing other tasks from running.

The only way to fix it is to cancel the task, then start execution over.

Is there any planned resolution for this?

I've been trying to figure it out for several weeks, trying all sorts of different things, but obviously it's a program bug.

This is taking me several hours a week to log into client computers, clean up the task process and restart.

I'll give it until 9/1/14 then will look for an alternate product that works.

And I'll be sure to post my experience wherever I can so others don't have to deal with the same issue.

We recently replaced our server and had to move FTP Voyager. We took a backup copy of the files as outlined in the article http://www.serv-u.com/kb/1189/how-to-back-up-and-restore-ftp-voyager . We did a new install of FTPVoyager v 16.1.0 and reinstalled the backup files onto the new server.

We have now discovered after much head scratching and lost hours, that the email settings relating to SMTP server, and the sending address (From) are not being correctly maintained. We tried to update the SMTP setttings in the GUI (both in Scheduler and in Voyager) but they are not used when Scheduler runs an Event that requires email. Instead, it appears to use the ones in the FTPVoyagerSettings.Archive file.

In order to change the SMTP server name and the "From" entry we now have to do this by hacking the FTPVoyagerSettings.Archive file rather than via the GUI.

Is this a known bug? Is there anything we can do to get the parameters set in the GUI of Voyager and Scheduler to be retained and used?

Also, whilst asking questions in this area, why are there 2 interfaces for email settings under Tools - one in Options and one in Scheduler options. These seem to be independent as we can put different values in each which are retained between sessions- both of which are ignored(!) in favour of those in FTPVoyagerSettings.Archive file.  I have been unable to track down where the GUI values are actually stored.

A right dog's breakfast.

Barry Sutton.

Something has happened with our installation of Voyager to cause the scheduler service to become unstable. I'm trying to determine the safest way to perform a repair on the software to try and get it back up and running.

We have the following error in the windows event logs:

Faulting application name: FTP Voyager Scheduler.exe, version: 16.2.0.328, time stamp: 0x542c31b7

Faulting module name: MSVCR100.dll, version: 10.0.40219.325, time stamp: 0x4df2bcac

Exception code: 0xc0000417

Fault offset: 0x0000000000070468

Faulting process id: 0xbec

Faulting application start time: 0x01d04b96d28e7566

Faulting application path: C:\Program Files\RhinoSoft\FTP Voyager\FTP Voyager Scheduler.exe

Faulting module path: C:\Program Files\RhinoSoft\FTP Voyager\MSVCR100.dll

Report Id: 11a095ee-b78a-11e4-80d6-005056a8624c

Faulting package full name:

Faulting package-relative application ID:

Any suggestions? We have quite a few profiles that we don't want to have to re-create here so I'm hoping there is a repair process rather than a clean re install.

Thanks

Well i am confused with the syncoptions switchs. The documentation is very odd and not very straight forward.

What i am needing to do is move all folders and their contents from a local folder to a remote folder that already has folders and files.   I need everything to remain on the remote and only add the new folder from the local, then clear the local folder.    A 'cut and paste into' type move.

What option would i use?

The 0  and 1 options seem to indicate it will delete everything on side A that is not on side B, and then copy side B files over to side A, thus being 'synced'.

I need more of a move from side A and add to everything on side B.

• syncoptions: The syncoptions flag specifies how a Synchronization will take place. To determine what value should be used, refer to the list at the bottom of this page. The value here must be a decimal representation of the sum of all applicable hex values. If no other options are specified, the synchronization process will upload or download missing files from the master, and delete files from the target that are missing from the master. The simplest syncoptions are the following:
  • syncoptions=0 - synchronize a remote folder to a local folder. The master is the local folder, and the remote folder is getting synchronized to match it.
  • syncoptions=1 - synchronize a local folder to a remote folder. The master is the remote folder, and the local folder is getting synchronized to match it.
• SyncRemote = 0x0000
• SyncLocal = 0x0001
• IgnoreCase = 0x0002
• CompareSize = 0x0004
• CompareTime = 0x0008
• IncludeDirs = 0x0010
• DontDelete = 0x0020
• OverwriteConfirmations = 0x0040
• DeleteConfirmations = 0x0080
• RemoteIgnoreNewer = 0x0100
• RemoteIgnoreOlder = 0x0200
• LocalIgnoreNewer = 0x0400
• LocalIgnoreOlder = 0x0800
• MinimizeStatusDialogs = 0x1000
• QueueErrorMessages = 0x2000
• IgnoreSymbolicLinks = 0x4000

Hello

Is there anyway to backup all the Scheduler settings?

(Site Profiles and Tasks)

I'm setting up the FTP Voyager Scheduler to download backup files from our F5's. It works on some, with this log message:

[12] Tue 13Oct15 12:05:04 - (Task: f5-internal-01_backup) - Execution successfully completed.

[07] Tue 13Oct15 12:05:07 - SSH_MSG_DISCONNECT: reason code 11; description: Disconnection initiated by user.

But fails on 4 out of 6 with this log message:

The last message is from having to cancel the task, as it just sits at "Executing". The only difference is the F5 OS version, the ones that work are 11.2.0 and the ones that fail are 11.6.0, anyone see this before?

Hello

I’m trying to run FTP Voyager from the command line like so:call "C:\Program Files\RhinoSoft\FTP Voyager\FTP Voyager.exe" profile=ZFTP autosync=1 syncoptions=0 local=C:\zsm2web\ remote=/ZSMDOC/ autoquit=1

This works if the remote folder is empty.

I want  to overwrite the existing files based on the timestamp of the files in the local folder or delete the files if they dont exist in de local folder.

Can anyone give me a working example using :

syncoptions List

•         SyncRemote = 0x0000

•         SyncLocal = 0x0001

• IgnoreCase = 0x0002

• CompareSize = 0x0004

• CompareTime = 0x0008

• IncludeDirs = 0x0010

• DontDelete = 0x0020

• OverwriteConfirmations = 0x0040

• DeleteConfirmations = 0x0080

• RemoteIgnoreNewer = 0x0100

• RemoteIgnoreOlder = 0x0200

• LocalIgnoreNewer = 0x0400

• LocalIgnoreOlder = 0x0800

• MinimizeStatusDialogs = 0x1000

• QueueErrorMessages = 0x2000

• IgnoreSymbolicLinks = 0x4000

  Not sure how i should add this to the command line so a complete working example woulde be appreciated

Hi All,

I'm trying to rename a file that has a date in the filename, but the 2 methods I'm trying are both failing.

Using date variables followed by a wildcard                                             Using date variables WITHOUT a wildcard

Image may be NSFW.
Clik here to view.                         Image may be NSFW.
Clik here to view.

Since today is September 30 2014, I KNOW %m = 09, %d = 30, and %Y = 2014. Yet, somehow the date variables are not being interpreted. Any idea why not?

I'm running this script on my PC1 with FTP Voyager version 16.2 but it does just open FTP voyager and DOES NOTHING.  No file transfer at all.

I checked and I do see 2 zip files inside d:\temp\ folder.  However if I take this same script and execute on another PC and it work fine.  This PC has same FTP voyager version and same configuration as PC1.

Can someone help? thanks.

FOR %%G in (d:\temp\*.zip) do (

echo.found %%G

"C:\Program Files\RhinoSoft\FTP Voyager\FTP Voyager.exe" profile="Art_Test_FTPserver" put=%%G remote="/" logfile=NAR_upload.log -nostartupwizard -nosplash autoquit=1

Echo uploaded %%G successfully

Echo.

)

Echo.

Echo completed ...

I need to schedule an FTP download and then delete the files on the FTP server.   How do you delete only after successful download.

I had everything setup and working and then set the scheduler to run as a service.  Running as a service you can not use mapped network drives so the download failed but the delete files still ran fine.

Thoughts

I've had FTP Voyager and FTP Scheduler installed for many years.

On 11/2/2012 the scheduler stopped running nightly backups and now only generates errors when manually executing the jobs.

"Could not retrieve additional information about the local path. Please make sure the path exists and the local user has permissions".

This system has been setup for years and has not changed. The FTP Voyager can manually connect to the profile and I can download files from the server manually without problems.

The only major change to the system were recent FTP software upgrades and patches.

I've double checked the FTP Scheduler Profiles (which never changed passwords in the first place).

I've added a brand new FTP folder with new login password to the server which connects in FTP Voyager, but generates the same errors when manually executing a synch job in FTPV Scheduler.

And I've tried restarting the FTP Voyager Scheduler service and rebooting.

Also nothing has changed on the server and all the files and folders have full read/write access (and can be copied down manually from the FTP Voyager).

Its only when executing the job from within FTP Scheduler that it now fails with these messages and it started around 11/2/12.  But I can't recall on what dates I applied the FTP software patches and upgrades.

We are having some trouble with FTP Voyager Scheduler.

We are using it to run download and upload tasks, most of them hourly.

The scheduler seems to hang every now and then while running a task. It says "Executing" on the task, but there's nothing happening on the log.

Usually it helps to cancel the hung task, but after this the scheduler seems to want to execute it non-stop until the next scheduled execution.

This problem seems to occur at least daily thus rendering the scheduler useless to us.

Are there any settings that could help us?

We are running FTP Voyager v16.0.2.0 on Windows server 2008 R2 64-bit.

When I start a Scheduler Sync I see multiple Site Profiles with the same names. How do I clean this up?

I have a connection set up to a server, all that is fine...

I can send smaller files just fine...

Larger files? It seems that the Command channel times out...

In the header of the Welcome message is a warning of a timeout at 3 minutes of inactivity...

So I dutifully setup a 150 second Keep Alive...

What I see in the log is...

The file (11GB+) sends fine...(Although there seems to be many reconnections during the transfer)

I will see an OPTS MLST command send

followed by a PWD and then a reconnection attempt...

Finally I will see a "Transfered <many> bytes STATUS message... Followed by an XCRC - which seems to receive no response after maybe 30 seconds...

Then another PWD...

Then an ERROR> Server has unexpectedly closed the connection...

And we start again....

Ideas?

I have several tasks setup to run at different time intervals on a daily basis.

After the time change for Daylight Savings Time on Sunday morning the tasks run as scheduled and then stop and re-start continuously.

I have tried re-starting the service, updating the task scheduler time and re-booting the server all to no avail.

Has anyone else seen this or does anyone have any ideas on how to correct it.

I am on FTP Voyager version 16.0.2.0.

Never had this issue on any previous versions.

Is there a place to download version 15 again????

Hi,

We have a schedule running every minute to move files from one location to another

It seems to run fine the 99% of the time however occasionally the task hangs and is stuck at executing (which therefore makes our other tasks wait in the queue)

It is so sporadic but looks as though it only occurs when a file is created in the outbound folder at the same time as the task is executing

The error message I get in the log is as per below:

[04] Wed 21Oct15 13:53:22 - SSL Accept failed on FTP data channel. The connection will be aborted.

Thanks,

Mike

Hi

I've referred to here by FTP Voyager support.

This is my first time I use FTP Voyager for scheduling file transfer, configuring task was very easy, but I still cannot make it work.

In the task action, I created a new action to download a specific folder (and all files and subfolders inside that folder to my local PC

In action information, I put the (Remote File or Folder) as: /FolderName

Nothing downloaded, and error in the log says:

Execution failed (Last Error Message: Unable to perform file action: Could not retrieve additional information about the source path.  Does the source path exist?).

I changed it to: FolderName (without slash).

Nothing downloaded, and same error in the log.

I then tried: FolderName/*.*

Log says: Execution successfully completed.

But in the local folder, I found it only downloaded files from main folder (No subfolders or files inside them), and some of them with ZERO size !!!!!

Again, I tried: /FolderName/*.*

Log says: Execution successfully completed.

I found that the ZERO size problem has been solved (files downloaded with correct size) but still cannot get the subfolders !

In the forum, I found a link to the older version (ver. 15.2.0.19)

I downloaded and tried it on another PC, It works like a charm, with no errors !

Can anyone here help me to figure out how to make the scheduler download the whole content of remote folder ??

When I create an action, where is the configuration file stored on my hard drive? I am interested in programmatically modifying some of the action settings in the FTP Voyager Scheduler. For instance, if I put FTP Voyager on 5 computers and need to make a small modification to their settings, I would prefer not to have to go to all 5 computers to make this change. Instead, I could send an updated configuration file to each computer when I send out updates and the new settings will take affect, after perhaps requiring a reboot of the service.

Is this possible? Are FTP Voyager Scheduler settings or actions written to some .config/xml/.ini or other type of file?

Thanks!